• News
  • Company news
  • Industry news
  • Test Report
  • Power Curves Test Report
  • EL Test Report
  • Contact
  • company map
  • Download center
  • 产品中心

    M300 Wind Turbine Generator

    2016-06-03 15:13:51

    M300 Wind Turbine Generator


    1. Technical Parameter

    Model
    M300
    Rated Voltage(DCV)
    12/24
    Rated output(W)
    90
    Start-up wind speed(m/s)
    1
    Survival wind speed(m/s)
    35
    Rotor diameter(m)
    0.82
    Blades No.(pcs)
    6
    Blade material
    Reinforced fiber glass
    Nacelle material
    Aluminum
    Controller
    Built-in
    Protection mode
    Short circuit
    Lifetime(years)
    25
    Packing form
    carton
    Protection grade
    IP65


    2. Power Curve

    3. Structure


    4. Special note

    Connection diagram between wind generator andpole

    1.Connectsmall pole and pipe(48*2.5mm diameter).

    2.Drill 2pcs of symmetrical screw holes(12mm diameter) above a diatance of20mm at the upper end of pipe.

    3.Clockwise 90°in thehole above the distance of 20mm, and drill2pcs of symmetrical screw holes(12mmdiameter) above a diatance of 38mm at the upper end of pipe.

    4.Fasten the pipe between wind generator and tower with 4pcs screws(M10).

    Note: The joints betweenwind generator and pole need a torque of 80nm. Fix with locking grain rubber insuitable condition.




    Contact telephone:
    ICP备案号  Copyright © 2016 江苏神州新能源电力有限公司  |        技术支持:左右互联